The product installed on the road has a problem with its compression resistance. The product is either crushed or separated from top to bottom. This is actually caused by an unreasonable structure. The main manifestation of the unreasonable structure:
1. The interior is hollow, and the hollow is not compressive.
The hazard of the internal hollowness is also manifested in the LED lampshade, which is destroyed because of the hollowness, and then the LED itself will be destroyed.
After the white board is drawn out, the steel ball falls freely at a height of one meter, and impacts the solar road stud LED lampshade vertically. See if the lampshade is broken.
2. Wrong structure with nail feet
The solar road studs with spikes are divided into two parts. The lower part is the base part with spikes, and the upper part is the solar panel, LED and lampshade. The upper and lower parts are connected by several screws. As of 2014, most of the solar spikes with spikes All adopt this structure. When this product is installed on the road and fixed with glue, it actually only fixes and glues the lower part of the solar road stud, and the upper part is only fixed to the lower part by a few small screws. The most common problem of solar road studs with spikes is the separation of the upper and lower parts. During the rolling process of the vehicle, a few screws are too thin and the force is too small. The top part of the vehicle will fly off after a few presses. The solar road stud without feet is more stable. The whole road stud is glued to the ground. The top of the road stud with feet is equivalent to fixing to the ground with a few small screws.
Q What countries and regions do you mainly sell to?
A Uae, Qatar, Cyprus, India, Thailand, Vietnam, Philippines, Malaysia, Indonesia
Q What are your advantages
A Our products quality is stable, all the products have been inspected instead of random inspection. Our company has strong production capacity, the delivery time can be the shortest in the industry, strong industrial chain integration ability (solar panel, integrated circuit boards, shell injection molding, finished products assembly all made by ourself), cost advantage and strong R & D ability，first-class after-sales service.
Q What products do you mainly promote
A Solar road stud, Solar barricade light, Vehicle warning light, Solar panel, Blinker warning light square shape